Radial Catapult Mini TX 4 Channel Audio over Cat5 Breakout Box
RRP $249.00
12% OFF
RRP $249.00
12% OFF
RA-CATAP-MINI-TX
RA-CATAP-MINI-TX
Ships Directly to You!
RADIAL CATAPULT MINI TX
4-Channel Cat5/6 Audio Snake
The Radial Catapult Mini TX is a compact passive audio snake that allows you to transmit four channels of analogue audio over standard Cat 5 or Cat 6 Ethernet cable via it's female XLR connectors.
Part of the Catapult Mini range, this breakout box makes running multiple channels of audio a breeze!
The Radial Catapult Mini System works like a typical four-channel analogue audio snake; they allow you to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed.
What makes the Catapult system unique is that it utilises Cat5/6 Ethernet cable, which is widely available, lightweight, and economical.
Simply connect a shielded Cat5 or Cat6 cable between any two Catapult modules and they will use the analogue conductors in the cable to deliver four balanced audio lines to any destination.
Catapult modules require no power to operate, and since they keep the signal in the analogue realm, no digital conversion is necessary.
Straight-wire connection from the XLRs to the RJ45 connector on a Cat5/6 cable ensures that your audio passes through without colouration or distortion.
As many buildings are already pre-wired for Cat5 or Cat6, you can take advantage of this to transmit audio between distant rooms without the need to install or supply new cabling.
This eliminates the need for bulky and expensive multi-channel audio cable, and allows contractors to benefit from installed network cable and easily connect from one room to another.
Three versions of the Catapult Mini are available: The Mini TX features female XLR connectors, the Mini RX has male XLRs, and the Mini TRS is equipped with ¼” TRS jacks for balanced connection to any pro audio device.
The Mini TX and RX can be directly connected using a single Cat5 or 6 cable, providing you with a robust 4-channel analogue audio snake that can deliver balanced signals over long distances while maintaining high audio quality.
The Mini TRS has ¼” balanced connectors commonly found on rack-mount interfaces and other compact pro audio equipment, allowing you to match connector types without the need for adaptor cables.
You can use the Catapult TX4 with the Mini RX to send audio signals from a live stage to the FOH console.
The Catapult TX4 provides a robust stage box to plug your microphones into, while the Mini RX is small enough to fit in the case of a mixing board, with its XLR output connectors plugged directly into the mixer.
If you’re splitting signals on stage, you can utilise one of the transformer isolated Catapult modules: the TX4M for mic-level signals, or the TX4L for line-level operation.
The Mini TX can be paired with the Catapult RX4 to feed the outputs of a console to a distant rack of power amps.
To block stray DC voltages and avoid noise through the system, the RX4L has line level isolation transformers to eliminate hum and buzz, as well as four direct XLR outputs to feed another device such as a recording interface.
For isolation of mic-level signals, you can utilise the RX4M.
Use the Ethernet cables already wired throughout a building to send audio from one room to the other without additional installation required or messy cables running from room to room.
Note: signals between two Catapult modules cannot pass through a network switch, as it will block the analogue audio signal.
For more information, Click Here to visit the Manufacturer's Website
| SKU | RA-CATAP-MINI-TX |
| Brand | Radial Engineering |
RADIAL CATAPULT MINI TX
4-Channel Cat5/6 Audio Snake
The Radial Catapult Mini TX is a compact passive audio snake that allows you to transmit four channels of analogue audio over standard Cat 5 or Cat 6 Ethernet cable via it's female XLR connectors.
Part of the Catapult Mini range, this breakout box makes running multiple channels of audio a breeze!
The Radial Catapult Mini System works like a typical four-channel analogue audio snake; they allow you to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed.
What makes the Catapult system unique is that it utilises Cat5/6 Ethernet cable, which is widely available, lightweight, and economical.
Simply connect a shielded Cat5 or Cat6 cable between any two Catapult modules and they will use the analogue conductors in the cable to deliver four balanced audio lines to any destination.
Catapult modules require no power to operate, and since they keep the signal in the analogue realm, no digital conversion is necessary.
Straight-wire connection from the XLRs to the RJ45 connector on a Cat5/6 cable ensures that your audio passes through without colouration or distortion.
As many buildings are already pre-wired for Cat5 or Cat6, you can take advantage of this to transmit audio between distant rooms without the need to install or supply new cabling.
This eliminates the need for bulky and expensive multi-channel audio cable, and allows contractors to benefit from installed network cable and easily connect from one room to another.
Three versions of the Catapult Mini are available: The Mini TX features female XLR connectors, the Mini RX has male XLRs, and the Mini TRS is equipped with ¼” TRS jacks for balanced connection to any pro audio device.
The Mini TX and RX can be directly connected using a single Cat5 or 6 cable, providing you with a robust 4-channel analogue audio snake that can deliver balanced signals over long distances while maintaining high audio quality.
The Mini TRS has ¼” balanced connectors commonly found on rack-mount interfaces and other compact pro audio equipment, allowing you to match connector types without the need for adaptor cables.
You can use the Catapult TX4 with the Mini RX to send audio signals from a live stage to the FOH console.
The Catapult TX4 provides a robust stage box to plug your microphones into, while the Mini RX is small enough to fit in the case of a mixing board, with its XLR output connectors plugged directly into the mixer.
If you’re splitting signals on stage, you can utilise one of the transformer isolated Catapult modules: the TX4M for mic-level signals, or the TX4L for line-level operation.
The Mini TX can be paired with the Catapult RX4 to feed the outputs of a console to a distant rack of power amps.
To block stray DC voltages and avoid noise through the system, the RX4L has line level isolation transformers to eliminate hum and buzz, as well as four direct XLR outputs to feed another device such as a recording interface.
For isolation of mic-level signals, you can utilise the RX4M.
Use the Ethernet cables already wired throughout a building to send audio from one room to the other without additional installation required or messy cables running from room to room.
Note: signals between two Catapult modules cannot pass through a network switch, as it will block the analogue audio signal.
For more information, Click Here to visit the Manufacturer's Website
| SKU | RA-CATAP-MINI-TX |
| Brand | Radial Engineering |
Our expert staff are always ready to answer any of your questions.
With years of hands-on experience to draw from, we take pride in giving our customers the best advice and support.
Copyright © 2024 QLD Sound and Lighting.
ABN: 87654212414
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern QLD Sound and Lighting’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘QLD Sound and Lighting’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is Ereton Drive Arundel, QLD 4215. Our ABN is 87654212414. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
We want you to have a positive experience shopping with us, so we offer a 30 day returns policy should the product not be suitable.
Simply open a return request from your account on our site, or contact us by phone or email. We will then provide an RA (return authorisation) number and instructions on where to send the parcel.
Please note, returns are only accepted if the goods are unopened, with all packaging and any seals unbroken. If you've used or opened the product, we cannot sell it as new. I'm sure you'd agree when buying something you expect it to be brand new! The refund or credit will be minus our shipping and admin fees
Some items are exluded from this returns policy, including any product that may present hygeine issues. These products are deemed excluded at our discretion.
All products sold by this site come with a guarantee to be free of defects, in accordance with Australian Consumer Law.
However, please choose carefully as refunds are not usually provided when you have simply changed your mind, found it cheaper elsewhere, or made a wrong selection.
We reserve the right to accept any of these mentioned returns at our discretion, although restocking fees and administration fees may apply.
If goods have arrived damaged, please contact QLD Sound and Lighting by phone email at admin@soundlight.com.au within 24 hours of delivery.
We understand you may be wary providing your personal information and credit card details online, which is why we've taken a range of steps to ensure your details remain private.
We take all reasonable steps to keep secure any information which we hold about you.
Personal information may be stored both electronically on our computer system, and in hard-copy form.
Firewalls, 2048 Bit v3 SSL encryption, passwords, anti-virus software and email filters act to protect all our electronic information.
We do not store credit card information, we securely submit credit card information to our bank for processing.
When shopping online, make sure you only provide personal or payment details to a secured site. You can tell if the site is secure by looking at the start of the addres bar, you will see a locked padlock icon. This shows that the site is encrypted and your information cannot be seen by any others.
In our checkout, at the top you'll notice a logo confirming the checkout process is safe. Feel free to click on that logo for more information, it will confirm the date and status of our checkout security.
Again, we do not store any card details, we don't even have access to them. The whole process is handled by e-way, who are the most secure payment processors there are.
Please feel free to get in touch if you have any concerns.
QLD Sound and Lighting is committed to providing quality services to you and this policy outlines our ongoing obligations to you in respect of how we manage your Personal Information.
We have adopted the Australian Privacy Principles (APPs) contained in the Privacy Act 1988 (Cth) (the Privacy Act). The NPPs govern the way in which we collect, use, disclose, store, secure and dispose of your Personal Information.
A copy of the Australian Privacy Principles may be obtained from the website of The Office of the Australian Information Commissioner at www.aoic.gov.au
Personal Information is information or an opinion that identifies an individual. Examples of Personal Information we collect include: names, addresses, email addresses, phone and facsimile numbers.
This Personal Information is obtained in many ways including via our website soundlight.com.au. We do not purchase information from any third parties (besides those related to our website - eg. order fulfilment apps), and we don’t guarantee website links or policy of authorised third parties.
We collect your Personal Information for the primary purpose of providing our services to you, providing information to our clients and marketing.
An example of how we may use this information is:
Using the mobile telephone number you provided when completing checkout to notify you that your order has been shipped, and to provide you with tracking information.
We may also use your Personal Information for secondary purposes closely related to the primary purpose, in circumstances where you would reasonably expect such use or disclosure. You may unsubscribe from our mailing/marketing lists at any time by contacting us in writing.
When we collect Personal Information we will, where appropriate and where possible, explain to you why we are collecting the information and how we plan to use it.
Sensitive information is defined in the Privacy Act to include information or opinion about such things as an individual's racial or ethnic origin, political opinions, membership of a political association, religious or philosophical beliefs, membership of a trade union or other professional body, criminal record or health information.
Sensitive information will be used by us only:
• For the primary purpose for which it was obtained
• For a secondary purpose that is directly related to the primary purpose
• With your consent; or where required or authorised by law.
Where reasonable and practicable to do so, we will collect your Personal Information only from you. However, in some circumstances we may be provided with information by third parties. In such a case we will take reasonable steps to ensure that you are made aware of the information provided to us by the third party.
We will not sell or provide your details to any person or business that isn't related to the transaction.
Your Personal Information may be disclosed in a number of circumstances including the following:
• Third parties where you consent to the use or disclosure; and
• Where required or authorised by law.
Your Personal Information is stored in a manner that reasonably protects it from misuse and loss and from unauthorized access, modification or disclosure.
When your Personal Information is no longer needed for the purpose for which it was obtained, we will take reasonable steps to destroy or permanently de-identify your Personal Information. However, most of the Personal Information is or will be stored in client files which will be kept by us for a minimum of 7 years.
You may access the Personal Information we hold about you and to update and/or correct it, subject to certain exceptions. If you wish to access your Personal Information, please contact us in writing.
QLD Sound and Lighting will not charge any fee for your access request, but may charge an administrative fee for providing a copy of your Personal Information.
In order to protect your Personal Information, we may require identification from you before releasing the requested information.
It is important to us that your Personal Information is up to date. We will take reasonable steps to make sure that your Personal Information is accurate, complete and up-to-date. If you find that the information we have is not up to date or is inaccurate, please advise us as soon as practicable so we can update our records and ensure we can continue to provide quality services to you.
This Policy may change from time to time and is available on our website.
If you have any queries or complaints about our Privacy Policy please contact us at:
QLD Sound and Lighting Pty Ltd
admin@soundlight.com.au
