Turbosound Berlin TBV118L-AN 3000 Watt 18 Inch Powered Subwoofer
RRP $4,999.00
4% OFF
RRP $4,999.00
4% OFF
452391
452391
Ships Directly to You!
TURBOSOUND BERLIN SERIES TBV118L-AN
18" Powered Subwoofer with Klark Teknik DSP Technology and ULTRANET Networking
The TBV118L-AN is a compact powered single 18" 3,000-Watt front-loaded subwoofer that is ideally suited for a broad range of speech and music sound reinforcement applications in both fixed, portable and touring audio systems.
Designed to work individually without a controller, the TBV118L-AN provides optimal performance for FOH, offstage fill, stereo in-fill or distributed fill applications in a wide range of venues including nightclubs, concert halls, houses of worship, and more.
TURBOSOUND is recognised the world over for designing and building some of the most iconic loudspeakers and subwoofers. We take meticulous care and pride in maintaining that reputation by utilising only drivers designed specifically for each application – it’s what sets us apart from the competition.
The TBV118L-AN features a carbon fibre loaded 18" neodymium low frequency driver that utilises a dual voice coil design for high power capacity and extended low frequency output.
For its size and operating bandwidth, the TBV118L-AN delivers extremely high and virtually distortion-free output for world-class low frequency performance that will stand the test of time.
Equipped with a very efficient and lightweight KLARK TEKNIK Class-D power amplifier, the TBV118L-AN provides an impressive 3,000 Watts of output power in a highly portable and lightweight package.
Class-D amplification makes all the difference, offering the ultimate in energy efficiency and eliminating the need for heavy power supplies and large heat sinks.
A high degree of control over the loudspeaker system's performance is managed by a sophisticated, but easy to use KLARK TEKNIK Digital Signal Processor (DSP), which provides dynamic EQ and transparent limiting for the utmost punch and definition at high output levels – and long-term reliability.
ULTRANET connectivity is provided by two locking etherCON connectors. Up to 16 independent channels of 24-bit digital audio and control data are transmitted via a single CAT5 cable between compatible digital devices – including mixers, I/O stage boxes, powered loudspeakers and personal monitoring systems.
Simplified cable routing and ease of setup translate directly into significant time saved during installation.
On the rear panel of the amplifier module, the user interface's LCD display and single rotary encoder provide intuitive access to: position compensation, user EQ control, subwoofer integration and signal routing features.
In addition to the balanced XLR input, an XLR output is provided for daisy chaining more active subwoofers or for use with active loudspeakers. An onboard USB port provides access for remote control of the TBV118L-AN via a free PC computer software, as well as convenient DSP firmware updates.
Front loaded enclosures provide an optimal combination of low frequency extension, bass articulation and temporal accuracy for high impact sound reinforcement applications.
The low distortion bass reflex port design utilised in the TBV118L-AN reinforces the bass musical instrument frequencies and on board DSP processing ensures an effective acoustic transition for use with TBV123-AN active line array elements.
For low-frequency bass extension, the recommended cabinet ratio consists of one TBV118L-AN subwoofer per 3 TBV123-AN elements. For reverse cardioid subwoofer configurations, multiples of three TBV118L-AN enclosures are recommended with two front-firing enclosures and one rear-firing enclosure.
Finished in a highly durable semi matt black paint, the cabinet is constructed from 18 mm (3/4") plywood with a rugged powder coated perforated steel mesh grille backed with reticulated foam, a 20 mm threaded pole mount to support satellite speakers, and a durable handle for easy transport.
The TBV118L-AN includes integral suspension hardware for efficient array configuration and aiming, plus multiple internal M10 mount points that allow eye-bolt suspension in any orientation. Mains input and output link power connectors are Neutrik powerCON.
EASE GLL files are provided for EASE Focus Acoustic Simulation Software, which is available for free download. This allows accurate calculation of both acoustic coverage and suspension pick point selection for tilting and aiming the array at the desired angle.
For more information, Click Here to visit the Manufacturer's Website
| SKU | 452391 |
| Brand | Turbosound |
| Unit Of Measure | ea |
10 Years
TURBOSOUND BERLIN SERIES TBV118L-AN
18" Powered Subwoofer with Klark Teknik DSP Technology and ULTRANET Networking
The TBV118L-AN is a compact powered single 18" 3,000-Watt front-loaded subwoofer that is ideally suited for a broad range of speech and music sound reinforcement applications in both fixed, portable and touring audio systems.
Designed to work individually without a controller, the TBV118L-AN provides optimal performance for FOH, offstage fill, stereo in-fill or distributed fill applications in a wide range of venues including nightclubs, concert halls, houses of worship, and more.
TURBOSOUND is recognised the world over for designing and building some of the most iconic loudspeakers and subwoofers. We take meticulous care and pride in maintaining that reputation by utilising only drivers designed specifically for each application – it’s what sets us apart from the competition.
The TBV118L-AN features a carbon fibre loaded 18" neodymium low frequency driver that utilises a dual voice coil design for high power capacity and extended low frequency output.
For its size and operating bandwidth, the TBV118L-AN delivers extremely high and virtually distortion-free output for world-class low frequency performance that will stand the test of time.
Equipped with a very efficient and lightweight KLARK TEKNIK Class-D power amplifier, the TBV118L-AN provides an impressive 3,000 Watts of output power in a highly portable and lightweight package.
Class-D amplification makes all the difference, offering the ultimate in energy efficiency and eliminating the need for heavy power supplies and large heat sinks.
A high degree of control over the loudspeaker system's performance is managed by a sophisticated, but easy to use KLARK TEKNIK Digital Signal Processor (DSP), which provides dynamic EQ and transparent limiting for the utmost punch and definition at high output levels – and long-term reliability.
ULTRANET connectivity is provided by two locking etherCON connectors. Up to 16 independent channels of 24-bit digital audio and control data are transmitted via a single CAT5 cable between compatible digital devices – including mixers, I/O stage boxes, powered loudspeakers and personal monitoring systems.
Simplified cable routing and ease of setup translate directly into significant time saved during installation.
On the rear panel of the amplifier module, the user interface's LCD display and single rotary encoder provide intuitive access to: position compensation, user EQ control, subwoofer integration and signal routing features.
In addition to the balanced XLR input, an XLR output is provided for daisy chaining more active subwoofers or for use with active loudspeakers. An onboard USB port provides access for remote control of the TBV118L-AN via a free PC computer software, as well as convenient DSP firmware updates.
Front loaded enclosures provide an optimal combination of low frequency extension, bass articulation and temporal accuracy for high impact sound reinforcement applications.
The low distortion bass reflex port design utilised in the TBV118L-AN reinforces the bass musical instrument frequencies and on board DSP processing ensures an effective acoustic transition for use with TBV123-AN active line array elements.
For low-frequency bass extension, the recommended cabinet ratio consists of one TBV118L-AN subwoofer per 3 TBV123-AN elements. For reverse cardioid subwoofer configurations, multiples of three TBV118L-AN enclosures are recommended with two front-firing enclosures and one rear-firing enclosure.
Finished in a highly durable semi matt black paint, the cabinet is constructed from 18 mm (3/4") plywood with a rugged powder coated perforated steel mesh grille backed with reticulated foam, a 20 mm threaded pole mount to support satellite speakers, and a durable handle for easy transport.
The TBV118L-AN includes integral suspension hardware for efficient array configuration and aiming, plus multiple internal M10 mount points that allow eye-bolt suspension in any orientation. Mains input and output link power connectors are Neutrik powerCON.
EASE GLL files are provided for EASE Focus Acoustic Simulation Software, which is available for free download. This allows accurate calculation of both acoustic coverage and suspension pick point selection for tilting and aiming the array at the desired angle.
For more information, Click Here to visit the Manufacturer's Website
10 Years
| SKU | 452391 |
| Brand | Turbosound |
| Unit Of Measure | ea |
Our expert staff are always ready to answer any of your questions.
With years of hands-on experience to draw from, we take pride in giving our customers the best advice and support.
Copyright © 2024 QLD Sound and Lighting.
ABN: 87654212414
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern QLD Sound and Lighting’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘QLD Sound and Lighting’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is Ereton Drive Arundel, QLD 4215. Our ABN is 87654212414. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
We want you to have a positive experience shopping with us, so we offer a 30 day returns policy should the product not be suitable.
Simply open a return request from your account on our site, or contact us by phone or email. We will then provide an RA (return authorisation) number and instructions on where to send the parcel.
Please note, returns are only accepted if the goods are unopened, with all packaging and any seals unbroken. If you've used or opened the product, we cannot sell it as new. I'm sure you'd agree when buying something you expect it to be brand new! The refund or credit will be minus our shipping and admin fees
Some items are exluded from this returns policy, including any product that may present hygeine issues. These products are deemed excluded at our discretion.
All products sold by this site come with a guarantee to be free of defects, in accordance with Australian Consumer Law.
However, please choose carefully as refunds are not usually provided when you have simply changed your mind, found it cheaper elsewhere, or made a wrong selection.
We reserve the right to accept any of these mentioned returns at our discretion, although restocking fees and administration fees may apply.
If goods have arrived damaged, please contact QLD Sound and Lighting by phone email at admin@soundlight.com.au within 24 hours of delivery.
We understand you may be wary providing your personal information and credit card details online, which is why we've taken a range of steps to ensure your details remain private.
We take all reasonable steps to keep secure any information which we hold about you.
Personal information may be stored both electronically on our computer system, and in hard-copy form.
Firewalls, 2048 Bit v3 SSL encryption, passwords, anti-virus software and email filters act to protect all our electronic information.
We do not store credit card information, we securely submit credit card information to our bank for processing.
When shopping online, make sure you only provide personal or payment details to a secured site. You can tell if the site is secure by looking at the start of the addres bar, you will see a locked padlock icon. This shows that the site is encrypted and your information cannot be seen by any others.
In our checkout, at the top you'll notice a logo confirming the checkout process is safe. Feel free to click on that logo for more information, it will confirm the date and status of our checkout security.
Again, we do not store any card details, we don't even have access to them. The whole process is handled by e-way, who are the most secure payment processors there are.
Please feel free to get in touch if you have any concerns.
QLD Sound and Lighting is committed to providing quality services to you and this policy outlines our ongoing obligations to you in respect of how we manage your Personal Information.
We have adopted the Australian Privacy Principles (APPs) contained in the Privacy Act 1988 (Cth) (the Privacy Act). The NPPs govern the way in which we collect, use, disclose, store, secure and dispose of your Personal Information.
A copy of the Australian Privacy Principles may be obtained from the website of The Office of the Australian Information Commissioner at www.aoic.gov.au
Personal Information is information or an opinion that identifies an individual. Examples of Personal Information we collect include: names, addresses, email addresses, phone and facsimile numbers.
This Personal Information is obtained in many ways including via our website soundlight.com.au. We do not purchase information from any third parties (besides those related to our website - eg. order fulfilment apps), and we don’t guarantee website links or policy of authorised third parties.
We collect your Personal Information for the primary purpose of providing our services to you, providing information to our clients and marketing.
An example of how we may use this information is:
Using the mobile telephone number you provided when completing checkout to notify you that your order has been shipped, and to provide you with tracking information.
We may also use your Personal Information for secondary purposes closely related to the primary purpose, in circumstances where you would reasonably expect such use or disclosure. You may unsubscribe from our mailing/marketing lists at any time by contacting us in writing.
When we collect Personal Information we will, where appropriate and where possible, explain to you why we are collecting the information and how we plan to use it.
Sensitive information is defined in the Privacy Act to include information or opinion about such things as an individual's racial or ethnic origin, political opinions, membership of a political association, religious or philosophical beliefs, membership of a trade union or other professional body, criminal record or health information.
Sensitive information will be used by us only:
• For the primary purpose for which it was obtained
• For a secondary purpose that is directly related to the primary purpose
• With your consent; or where required or authorised by law.
Where reasonable and practicable to do so, we will collect your Personal Information only from you. However, in some circumstances we may be provided with information by third parties. In such a case we will take reasonable steps to ensure that you are made aware of the information provided to us by the third party.
We will not sell or provide your details to any person or business that isn't related to the transaction.
Your Personal Information may be disclosed in a number of circumstances including the following:
• Third parties where you consent to the use or disclosure; and
• Where required or authorised by law.
Your Personal Information is stored in a manner that reasonably protects it from misuse and loss and from unauthorized access, modification or disclosure.
When your Personal Information is no longer needed for the purpose for which it was obtained, we will take reasonable steps to destroy or permanently de-identify your Personal Information. However, most of the Personal Information is or will be stored in client files which will be kept by us for a minimum of 7 years.
You may access the Personal Information we hold about you and to update and/or correct it, subject to certain exceptions. If you wish to access your Personal Information, please contact us in writing.
QLD Sound and Lighting will not charge any fee for your access request, but may charge an administrative fee for providing a copy of your Personal Information.
In order to protect your Personal Information, we may require identification from you before releasing the requested information.
It is important to us that your Personal Information is up to date. We will take reasonable steps to make sure that your Personal Information is accurate, complete and up-to-date. If you find that the information we have is not up to date or is inaccurate, please advise us as soon as practicable so we can update our records and ensure we can continue to provide quality services to you.
This Policy may change from time to time and is available on our website.
If you have any queries or complaints about our Privacy Policy please contact us at:
QLD Sound and Lighting Pty Ltd
admin@soundlight.com.au
