Two Notes Torpedo Reload Reactive-Active Attenuator and DI
RRP $1,399.00
11% OFF
RRP $1,399.00
11% OFF
TWO-RELOAD
TWO-RELOAD
Placing an order now will secure stock from the next available shipment.
Two Notes' Torpedo Reload is your one-stop high-end device for quiet/silent playing and reamping.
A power attenuator, multi-impedance loadbox, DI, and re-amping box all in one, Torpedo Reload does it all - and quite well, we might add. This is essential kit for a proper guitarist's studio.
It's all about tone, and you may have used attenuators that have disappointed you in the past.
Torpedo Reload's Reactive-Active technology presents your amp with a consistent speaker impedance, for glorious, full, transparent sound - no matter how much attenuation you've dialled up.
Torpedo Reload comes with 24 Wall of Sound cabinets, and others are available for purchase directly from within the interface.
Why should re-amping be a hassle? With Two Notes Torpedo Reload, it's not.
The process is streamlined and easy. Just record your guitar direct, send the signal back to your amp using the Replay, drive your amp properly (this is automatic), lower your level (or make it completely silent) with Re-Act, and record the signal from the loadbox.
You can even use another mic and cabinet for a third option. And all this can all happen simultaneously. Incredible!
Plug your guitar into Torpedo Reload's Hi-Z DI input jack and send the signal to your DAW or recorder. You can later re-send the signal to your guitar amp via Reload's Replay function.
Torpedo Reload preserves your guitar's tone with pristine clarity, letting you re-inject it into your amp through the Replay.
Reactive-Active technology presents your amp with a consistent speaker impedance, for glorious, full, transparent sound - no matter how much attenuation you've dialled up.
If you're like a lot of today's guitarists, you'll probably want to concentrate on laying down solid tracks and worry about which amp to use at another time.
Torpedo Reload to the rescue!
The hardest part of re-amplification is making sure the output level on your DAW matches the level of your guitar when it's directly connected to your amplifier.
With Torpedo Reload's Match function, it's automatic!
Two Notes' innovative Match function solves the hassles of level adjustment when re-amping.
Match compares the signal as it comes from your guitar (plugged into Reload's DI input) with the signal you've recorded (which is sent to the Replay line input) so that what you send the amp is level-perfect.
You can be sure the signal you send from your DAW is precisely what your guitar itself would be sending.
Torpedo Reload ships with the Wall of Sound III cabinet model plug-in and gets you started with 24 speaker cabinets (you can purchase additional cabs directly via the interface).
In concert with Torpedo Reload and your favourite guitar or bass amp, Wall of Sound III achieves totally true-to-life studio miking of your amp.
You select the the cabinet and microphone; find the sweet spot and place the mic in your virtual studio. Then you can deploy all those cool Torpedo features, including power-amp simulation, 3rd-party IR compatibility, and the possibility of mixing up to 100 different cabs within a single plug-in instance. Wow!
From Two Notes:
Two Notes Audio Engineering, creator of the world’s best speaker cabinet simulation (cab sim), has bridged a new technological gap with the Torpedo Reload, your new high-end device for silent playing and reamplification.
The Torpedo Reload is the ideal combination of the devices you must have in a modern studio for the recording of electric guitars and basses: a power attenuator, a multi-impedance load box, a DI and re-amping box – it does it all and does it perfectly too.
The Two Notes philosophy stands in one word, transparency.
The tone must come from your guitar, your amp and cabinet – not from the electronics that we put between parts of your regular setup.
You love the sound of your amplifier pushed right to the magic sweet spot where the best tones are. Until now, the only available option was blasting your sound through a 4×12″ to properly excite a microphone.
Enter Torpedo, the simplest and most realistic way to get your sound to your audience. Use the amp you love!
Everything that makes a real amp rule over all the other alternatives is retained. You can even record silently late at night!
Gone is the backache from the loadout, complaints from neighbours, venue staff or even bandmates and the frustration of not being able to sound at one’s best trying to reduce the volume.
Attenuators are usually known for the negative impact they have on your tone in cases of heavy attenuation.
On the contrary, the Reactive-Active technology presents your amplifier with a consistent speaker’s impedance no matter what level of attenuation you’re at, and thus preserves the specific character of your amplifier.
With a choice of 4, 8, or 16 Ohms, your amplifier (up to 150W RMS) will actually see real speaker impedance, and your tone will remain constant throughout the continuous attenuation curve.
The result of years of research, the RE-ACT technology (Reactive-Active Attenuator) will tame your amplifier without ever betraying it.
From 0 dB attenuation to total silencing, you can nonetheless choose between absolute transparency to more vintage or modern tone colouring with the CONTOUR.
Plug your guitar into the DI Input and send that signal to your recorder. At that stage what you want is clarity and Two Notes preserves your guitar’s tone, as you will certainly want to re-inject it into your amp through the REPLAY.
One of the most interesting options in studios nowadays: play the guitar one day, and mike the amp (or many different amps) another. The Torpedo Reload is your re-amplifying device of choice.
The most difficult part in re-amplification techniques is finding the output level on the DAW that matches the level of your guitar when it is directly connected to the amplifier.
That problem is now solved, thanks to Reload’s unique…
This Two Notes innovation is the solution to the problem of level adjustment when re-amplifying.
MATCH compares the signal as it comes from the guitar (plugged to the DI input) with the signal that has been recorded (and which is sent to the REPLAY Line Input) so that what you send to the amp is the ideal level only.
Now you can be sure that the signal you send from the DAW is exactly what your guitar itself would be sending.
Torpedo Wall of Sound (WoS) is a speaker and miking simulation plugin. A plugin is a software you can load on a track of your sequencer, such as Cubase, Logic, Pro Tools, Reaper, inside your Digital Audio Workstation.
With your Torpedo Reload and WoS you have the best configuration to record amazingly good guitar or bass tones for all your musical projects.
The Torpedo Reload comes with 24 virtual cabinets usable with the WoS and all USB-equipped Torpedo hardware (C.A.B. M, Live, Studio, C.A.B. and VB-101).
To download your 24 cabinets, register your product on the Two notes Website, download and install the Wall of Sound (WoS) plugin. You will be guided step by step through the process.
Once you have become familiar with the sound and operation of the Wall of Sound plug-in, please feel welcome to explore the in-app Two notes Boutique. You can audition there the entire library of virtual cabinets (300+ and counting) and have the option to purchase additional cabinets.
Connection
Plug your guitar into the DI Input and send this signal to your recorder. Later on, you can re-send that signal to your amplifier by using re-amping techniques with the Reload‘s REPLAY function.
To make it perfect, Two Notes has developed the unique MATCH function – THE solution to the problem of level adjustment when re-amplifying.
Record your guitar using the DI, send the signal back to your amp using the REPLAY, drive your amp the way it should be driven and lower the level or simply make it silent with RE-ACT, record the signal from the load box, and even use your own microphone and cabinet for a third take – all simultaneously!
Front View:
1. ON/OFF switch
2. Hi-Z Instrument Input
3. REPLAY level
4. Load box Output level
5. Speaker attenuator volume
6. Contour
7. Air vent
8. Signal indicators
9. Load impedance indicators
10. MATCH indicators
11. Temperature warning
Rear View:
12. Cooling fan
13. RE-ACT speaker In
14. RE-ACT speaker outputs
15. Load box out (balanced)
16. Di Out (balanced)
17. REPLAY I/Os
The Two Notes active security system that you find in all the Two Notes product is there to protect both the player and the amplifier plugged to the Torpedo Reload against any kind of overheating and inappropriate impedance matching.
We use the best aluminium and steel for the utmost protection of the Reload‘s precious electronics.It’s heavy, built to last — it will survive any studio session or stage stress.
Reactive Load box:
Inputs / Outputs:
Dimensions & weight:
For more information, Click Here to visit the Manufacturer's Website
| SKU | TWO-RELOAD |
| Brand | Two Notes |
| Unit Of Measure | ea |
Two Notes' Torpedo Reload is your one-stop high-end device for quiet/silent playing and reamping.
A power attenuator, multi-impedance loadbox, DI, and re-amping box all in one, Torpedo Reload does it all - and quite well, we might add. This is essential kit for a proper guitarist's studio.
It's all about tone, and you may have used attenuators that have disappointed you in the past.
Torpedo Reload's Reactive-Active technology presents your amp with a consistent speaker impedance, for glorious, full, transparent sound - no matter how much attenuation you've dialled up.
Torpedo Reload comes with 24 Wall of Sound cabinets, and others are available for purchase directly from within the interface.
Why should re-amping be a hassle? With Two Notes Torpedo Reload, it's not.
The process is streamlined and easy. Just record your guitar direct, send the signal back to your amp using the Replay, drive your amp properly (this is automatic), lower your level (or make it completely silent) with Re-Act, and record the signal from the loadbox.
You can even use another mic and cabinet for a third option. And all this can all happen simultaneously. Incredible!
Plug your guitar into Torpedo Reload's Hi-Z DI input jack and send the signal to your DAW or recorder. You can later re-send the signal to your guitar amp via Reload's Replay function.
Torpedo Reload preserves your guitar's tone with pristine clarity, letting you re-inject it into your amp through the Replay.
Reactive-Active technology presents your amp with a consistent speaker impedance, for glorious, full, transparent sound - no matter how much attenuation you've dialled up.
If you're like a lot of today's guitarists, you'll probably want to concentrate on laying down solid tracks and worry about which amp to use at another time.
Torpedo Reload to the rescue!
The hardest part of re-amplification is making sure the output level on your DAW matches the level of your guitar when it's directly connected to your amplifier.
With Torpedo Reload's Match function, it's automatic!
Two Notes' innovative Match function solves the hassles of level adjustment when re-amping.
Match compares the signal as it comes from your guitar (plugged into Reload's DI input) with the signal you've recorded (which is sent to the Replay line input) so that what you send the amp is level-perfect.
You can be sure the signal you send from your DAW is precisely what your guitar itself would be sending.
Torpedo Reload ships with the Wall of Sound III cabinet model plug-in and gets you started with 24 speaker cabinets (you can purchase additional cabs directly via the interface).
In concert with Torpedo Reload and your favourite guitar or bass amp, Wall of Sound III achieves totally true-to-life studio miking of your amp.
You select the the cabinet and microphone; find the sweet spot and place the mic in your virtual studio. Then you can deploy all those cool Torpedo features, including power-amp simulation, 3rd-party IR compatibility, and the possibility of mixing up to 100 different cabs within a single plug-in instance. Wow!
From Two Notes:
Two Notes Audio Engineering, creator of the world’s best speaker cabinet simulation (cab sim), has bridged a new technological gap with the Torpedo Reload, your new high-end device for silent playing and reamplification.
The Torpedo Reload is the ideal combination of the devices you must have in a modern studio for the recording of electric guitars and basses: a power attenuator, a multi-impedance load box, a DI and re-amping box – it does it all and does it perfectly too.
The Two Notes philosophy stands in one word, transparency.
The tone must come from your guitar, your amp and cabinet – not from the electronics that we put between parts of your regular setup.
You love the sound of your amplifier pushed right to the magic sweet spot where the best tones are. Until now, the only available option was blasting your sound through a 4×12″ to properly excite a microphone.
Enter Torpedo, the simplest and most realistic way to get your sound to your audience. Use the amp you love!
Everything that makes a real amp rule over all the other alternatives is retained. You can even record silently late at night!
Gone is the backache from the loadout, complaints from neighbours, venue staff or even bandmates and the frustration of not being able to sound at one’s best trying to reduce the volume.
Attenuators are usually known for the negative impact they have on your tone in cases of heavy attenuation.
On the contrary, the Reactive-Active technology presents your amplifier with a consistent speaker’s impedance no matter what level of attenuation you’re at, and thus preserves the specific character of your amplifier.
With a choice of 4, 8, or 16 Ohms, your amplifier (up to 150W RMS) will actually see real speaker impedance, and your tone will remain constant throughout the continuous attenuation curve.
The result of years of research, the RE-ACT technology (Reactive-Active Attenuator) will tame your amplifier without ever betraying it.
From 0 dB attenuation to total silencing, you can nonetheless choose between absolute transparency to more vintage or modern tone colouring with the CONTOUR.
Plug your guitar into the DI Input and send that signal to your recorder. At that stage what you want is clarity and Two Notes preserves your guitar’s tone, as you will certainly want to re-inject it into your amp through the REPLAY.
One of the most interesting options in studios nowadays: play the guitar one day, and mike the amp (or many different amps) another. The Torpedo Reload is your re-amplifying device of choice.
The most difficult part in re-amplification techniques is finding the output level on the DAW that matches the level of your guitar when it is directly connected to the amplifier.
That problem is now solved, thanks to Reload’s unique…
This Two Notes innovation is the solution to the problem of level adjustment when re-amplifying.
MATCH compares the signal as it comes from the guitar (plugged to the DI input) with the signal that has been recorded (and which is sent to the REPLAY Line Input) so that what you send to the amp is the ideal level only.
Now you can be sure that the signal you send from the DAW is exactly what your guitar itself would be sending.
Torpedo Wall of Sound (WoS) is a speaker and miking simulation plugin. A plugin is a software you can load on a track of your sequencer, such as Cubase, Logic, Pro Tools, Reaper, inside your Digital Audio Workstation.
With your Torpedo Reload and WoS you have the best configuration to record amazingly good guitar or bass tones for all your musical projects.
The Torpedo Reload comes with 24 virtual cabinets usable with the WoS and all USB-equipped Torpedo hardware (C.A.B. M, Live, Studio, C.A.B. and VB-101).
To download your 24 cabinets, register your product on the Two notes Website, download and install the Wall of Sound (WoS) plugin. You will be guided step by step through the process.
Once you have become familiar with the sound and operation of the Wall of Sound plug-in, please feel welcome to explore the in-app Two notes Boutique. You can audition there the entire library of virtual cabinets (300+ and counting) and have the option to purchase additional cabinets.
Connection
Plug your guitar into the DI Input and send this signal to your recorder. Later on, you can re-send that signal to your amplifier by using re-amping techniques with the Reload‘s REPLAY function.
To make it perfect, Two Notes has developed the unique MATCH function – THE solution to the problem of level adjustment when re-amplifying.
Record your guitar using the DI, send the signal back to your amp using the REPLAY, drive your amp the way it should be driven and lower the level or simply make it silent with RE-ACT, record the signal from the load box, and even use your own microphone and cabinet for a third take – all simultaneously!
Front View:
1. ON/OFF switch
2. Hi-Z Instrument Input
3. REPLAY level
4. Load box Output level
5. Speaker attenuator volume
6. Contour
7. Air vent
8. Signal indicators
9. Load impedance indicators
10. MATCH indicators
11. Temperature warning
Rear View:
12. Cooling fan
13. RE-ACT speaker In
14. RE-ACT speaker outputs
15. Load box out (balanced)
16. Di Out (balanced)
17. REPLAY I/Os
The Two Notes active security system that you find in all the Two Notes product is there to protect both the player and the amplifier plugged to the Torpedo Reload against any kind of overheating and inappropriate impedance matching.
We use the best aluminium and steel for the utmost protection of the Reload‘s precious electronics.It’s heavy, built to last — it will survive any studio session or stage stress.
Reactive Load box:
Inputs / Outputs:
Dimensions & weight:
For more information, Click Here to visit the Manufacturer's Website
| SKU | TWO-RELOAD |
| Brand | Two Notes |
| Unit Of Measure | ea |
Our expert staff are always ready to answer any of your questions.
With years of hands-on experience to draw from, we take pride in giving our customers the best advice and support.
Copyright © 2024 QLD Sound and Lighting.
ABN: 87654212414
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern QLD Sound and Lighting’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘QLD Sound and Lighting’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is Ereton Drive Arundel, QLD 4215. Our ABN is 87654212414. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
We want you to have a positive experience shopping with us, so we offer a 30 day returns policy should the product not be suitable.
Simply open a return request from your account on our site, or contact us by phone or email. We will then provide an RA (return authorisation) number and instructions on where to send the parcel.
Please note, returns are only accepted if the goods are unopened, with all packaging and any seals unbroken. If you've used or opened the product, we cannot sell it as new. I'm sure you'd agree when buying something you expect it to be brand new! The refund or credit will be minus our shipping and admin fees
Some items are exluded from this returns policy, including any product that may present hygeine issues. These products are deemed excluded at our discretion.
All products sold by this site come with a guarantee to be free of defects, in accordance with Australian Consumer Law.
However, please choose carefully as refunds are not usually provided when you have simply changed your mind, found it cheaper elsewhere, or made a wrong selection.
We reserve the right to accept any of these mentioned returns at our discretion, although restocking fees and administration fees may apply.
If goods have arrived damaged, please contact QLD Sound and Lighting by phone email at admin@soundlight.com.au within 24 hours of delivery.
We understand you may be wary providing your personal information and credit card details online, which is why we've taken a range of steps to ensure your details remain private.
We take all reasonable steps to keep secure any information which we hold about you.
Personal information may be stored both electronically on our computer system, and in hard-copy form.
Firewalls, 2048 Bit v3 SSL encryption, passwords, anti-virus software and email filters act to protect all our electronic information.
We do not store credit card information, we securely submit credit card information to our bank for processing.
When shopping online, make sure you only provide personal or payment details to a secured site. You can tell if the site is secure by looking at the start of the addres bar, you will see a locked padlock icon. This shows that the site is encrypted and your information cannot be seen by any others.
In our checkout, at the top you'll notice a logo confirming the checkout process is safe. Feel free to click on that logo for more information, it will confirm the date and status of our checkout security.
Again, we do not store any card details, we don't even have access to them. The whole process is handled by e-way, who are the most secure payment processors there are.
Please feel free to get in touch if you have any concerns.
QLD Sound and Lighting is committed to providing quality services to you and this policy outlines our ongoing obligations to you in respect of how we manage your Personal Information.
We have adopted the Australian Privacy Principles (APPs) contained in the Privacy Act 1988 (Cth) (the Privacy Act). The NPPs govern the way in which we collect, use, disclose, store, secure and dispose of your Personal Information.
A copy of the Australian Privacy Principles may be obtained from the website of The Office of the Australian Information Commissioner at www.aoic.gov.au
Personal Information is information or an opinion that identifies an individual. Examples of Personal Information we collect include: names, addresses, email addresses, phone and facsimile numbers.
This Personal Information is obtained in many ways including via our website soundlight.com.au. We do not purchase information from any third parties (besides those related to our website - eg. order fulfilment apps), and we don’t guarantee website links or policy of authorised third parties.
We collect your Personal Information for the primary purpose of providing our services to you, providing information to our clients and marketing.
An example of how we may use this information is:
Using the mobile telephone number you provided when completing checkout to notify you that your order has been shipped, and to provide you with tracking information.
We may also use your Personal Information for secondary purposes closely related to the primary purpose, in circumstances where you would reasonably expect such use or disclosure. You may unsubscribe from our mailing/marketing lists at any time by contacting us in writing.
When we collect Personal Information we will, where appropriate and where possible, explain to you why we are collecting the information and how we plan to use it.
Sensitive information is defined in the Privacy Act to include information or opinion about such things as an individual's racial or ethnic origin, political opinions, membership of a political association, religious or philosophical beliefs, membership of a trade union or other professional body, criminal record or health information.
Sensitive information will be used by us only:
• For the primary purpose for which it was obtained
• For a secondary purpose that is directly related to the primary purpose
• With your consent; or where required or authorised by law.
Where reasonable and practicable to do so, we will collect your Personal Information only from you. However, in some circumstances we may be provided with information by third parties. In such a case we will take reasonable steps to ensure that you are made aware of the information provided to us by the third party.
We will not sell or provide your details to any person or business that isn't related to the transaction.
Your Personal Information may be disclosed in a number of circumstances including the following:
• Third parties where you consent to the use or disclosure; and
• Where required or authorised by law.
Your Personal Information is stored in a manner that reasonably protects it from misuse and loss and from unauthorized access, modification or disclosure.
When your Personal Information is no longer needed for the purpose for which it was obtained, we will take reasonable steps to destroy or permanently de-identify your Personal Information. However, most of the Personal Information is or will be stored in client files which will be kept by us for a minimum of 7 years.
You may access the Personal Information we hold about you and to update and/or correct it, subject to certain exceptions. If you wish to access your Personal Information, please contact us in writing.
QLD Sound and Lighting will not charge any fee for your access request, but may charge an administrative fee for providing a copy of your Personal Information.
In order to protect your Personal Information, we may require identification from you before releasing the requested information.
It is important to us that your Personal Information is up to date. We will take reasonable steps to make sure that your Personal Information is accurate, complete and up-to-date. If you find that the information we have is not up to date or is inaccurate, please advise us as soon as practicable so we can update our records and ensure we can continue to provide quality services to you.
This Policy may change from time to time and is available on our website.
If you have any queries or complaints about our Privacy Policy please contact us at:
QLD Sound and Lighting Pty Ltd
admin@soundlight.com.au
